Vibration Analysis and Vibration Testing Solutions

Dewesoft vibration analyzers provide precise vibration measurement with an unmatched 130 dB signal to noise ratio, with dynamic range up to 160 dB. Every kind of vibration sensor is supported (charge, IEPE, MEMS), as well as analog and digital tacho probes, counters, and encoders. You can easily perform run up and down tests, FFT and harmonic analysis, order tracking, torsional vibration, orbit and octave band analysis. In addition to powerful real-time and post-recording mathematics, DewesoftX software displays your data in a variety of 2D and 3D graphs and meters.

Browse products

Browse solutions

FFT Spectrum Analyzer

Vibration and frequency analysis with a Fast Fourier transform

Order Analysis

Noise and vibration analysis for rotating and reciprocating machinery

eVTOL Testing

Structural, Electrical, NVH, and Flight Testing Solutions

Check related case studies

Case Studies

Structural Health Monitoring of the Railway Viaduct

A railroad bridge in Saudi Arabia was observed for around 80 hours to evaluate its structural health with the monitoring system based on Dewesoft integrated sensing devices.

Rok Mesar

Case Studies

Monitoring Structural Vibrations from Quarry Blasts in a Family Home

A student project measured structural vibrations in a family home near a quarry using a Dewesoft IOLITEi-3xMEMS-ACC system. Over three weeks, data revealed short, intense spikes from quarry blasts, exceeding international safety limits for human exposure by more than 30 times. While traffic-induced vibrations were minimal, repeated exposure to blasts may pose a risk of structural damage and discomfort for residents, underscoring the need for ongoing vibration monitoring.

Case Studies

Electro Impedance Spectroscopy (EIS) Measurements on Electrolysis Stacks

The article highlights how HyCentA uses Electrochemical Impedance Spectroscopy (EIS) with Dewesoft technology to optimize electrolysis stacks for green hydrogen production. Green hydrogen is presented as a key solution for decarbonizing industries and balancing renewable energy, with EIS enabling critical improvements in efficiency and stability to support global carbon neutrality goals.

Case Studies

Synchronized Combustion and NVH Measurements on an Engine Test Bench

University of Applied Sciences in Frankfurt sought to simplify vibration and noise measurement for car design. Dewesoft's solution allowed for synchronized data acquisition and various exports from one measurement file, reducing interactions and testbed hours.

Thorsten Hartleb

Case Studies

Vibration Test on High-Voltage Reactor

Learn how vibration measurement with a power analysis solution is used to identify the differences in the level of vibrations on a high-voltage reactor.

Gabriele Ribichini

Browse all case studies »